Faça a sua instalação  

Download our technical sheet here and see here a theoretical scheme.

The installation of a house garden irrigation system can be considered as handcraft, done with no utmost effort, since on one hand the equipment is of simple use and on the other hand the technical information provided by the Plascampo technicians will help you with your doubts. The irrigation accessories are easy to install and there is a series of tools which smooth the progress of installation. In addition, the project of installation and the personalized guidance concerning each situation will clarify the whole process. Thus, the installation may be easily done by yourself. However, if you need counselling throughout the process we can put you in contact with any of our qualified technicians.

In order to draw the irrigation project for your garden we need the following data:


- Water flow rate

In case your water is supplied by your own water pump the technical information on it will allow attaining the water flow rate.
In case the water is supplied by the water company from a tap, either use the water meter to estimate the flow rate or, as an alternative, a rather simple method to do it: get a container with a defined capacity (a bucket would be perfect) and a watch, open the tap totally and control the time it takes to fill the container. This allows us to know the water flow rate. You can give us the records obtained just as they have been read (for example, a 10 litre bucket took 20 seconds to fill).

- Water pressure

In case your water is supplied by your own water pump, the technical information on it will allow attaining the water pressure.
In case the water is supplied by the water company from a tap, either use a manometer placed on the pipe or question the water supplier’s services about its pressure.

- Illustration of the area for the irrigation system;

The drawing must include the outlines and the measurements, as well as the distance from these areas to the source of the water. It is usually easier to use the original project of the house and the surrounding perimeter. Use our technical sheet for your data.

- Type of plants to be watered

Describe the type of planting in each irrigation area, for example a lawn, rock garden, herbaceous plants, trees, hedge, mixed types, etc.

- Uneven ground

In case you have significant differences in level, mark them in the illustration and describe the dimension.